Quiet, easy power - the MMG55DF4 Diesel Generator
The Generac Mobile Products MMG55DF4 delivers a lot of power in an innovative, easy to use and easy to maintain package. The unit was specifically designed with a cabinet that has the features customers want to be as maintenance free and easy to use as possible. And it’s supported by a Tier 4 engine with a long run time and the ability to easily select the power output needed. All of this is encapsulated in a sound attenuated, rust-proof, aluminum enclosure so you can use the unit anywhere power is needed – at an event or on the job.
Features & Benefits
DURABLE
- EPA Tier IV Turbocharged, after-cooled diesel engine
- 3 position selector switch for power output flexibility
- Long-run time – 24 hours
- Rust-proof, aluminum enclosure
EASY TO USE
- Power Zone™ controller and display
- Push buttons for easy operation
- Voltage adjustment integrated into Power Zone controller
- Aluminum, sound attenuated enclosure
SAFE
- 9 warning and shutdown features
- Lockable control box door with diagnostics window
- Lockable lug box with safety switch
- Emergency stop switch located on outside of enclosure
- Central lifting point
- 120% Containment
Additional information
ENGINE | John Deere,® 3029HFG03 – turbocharged, aftercooled diesel engine |
---|---|
GENERATOR | Marathon Electric® SUPERSTART™ o Brushless o 4 pole o Class H insulation Voltage regulation +/- 0.5% with Magnum PM600 Voltage Regulator |
SYSTEM OUTPUTS | 3 position selector switch o Single phase – 120 / 240V Zig Zag o Three phase – 120 / 208V Low Wye o Three phase – 277 / 480V High Wye 46 kW / 46 kVA – standby, single phase 42 kW / 42 kVA – prime, single phase 48 kW / 60 kVA – standby, three phase 44 kW / 55 kVA – prime, three phase |
SYSTEM CONTROLS | Power Zone® controller and display o Backlit, 800 x 480 pixel resolution color display o -40°F to 185°F (-40°C to 85°C) operating temperature range o Automatic coarse voltage adjustment o Integrated fine voltage adjustment o PLC functionality Push buttons for easy operation o Manual or Auto Start o Engine Start o Engine Stop/Reset o Alarm Mute o Operator Screens Home Engine Generator Voltage Adjust o Scrolling Arrows for Diagnostic Information Engine diagnostic display Oil pressure Engine temperature Fuel level Battery After treatment inlet/outlet temperature Ash/soot levels Generator diagnostic display System kW output display Line output & frequency display Alarms Warning Shutdown Electrical Trip Engine Alarm list – warnings / shutdowns; 250 event history log – date/time stamp Fuel level: warning – 15%; shutdown – 5% Over speed protection: shutdown – 115% Oil pressure: warning – 25 psi; shutdown – 20 psi Coolant temperature: warning – 220°F (104°C); shutdown – 230°F (110°C) Battery voltage: over – 15VDC; under – 11VDC Generator over voltage: warning – 110%; electrical trip – 111% Generator under voltage: warning – 87%; electrical trip – 86% Generator over frequency: warning – 105%; electrical trip – 110% Generator under frequency: warning – 95%; electrical trip – 90% |
SYSTEM CONTROLS (continued) | Inputs/Outputs Auto Schedule Status Configuration of controller, firmware and connections |
ELECTRICAL CONTROLS | Remote start / stop contacts located in lug box Lockable control box door with diagnostics window Lockable lug box with safety switch o Trips main breaker when door is opened o Disables voltage regulator Output ground connection lug inside lug box 225A main breaker with shunt trip Convenience receptacles with individual breakers (restricted use in high wye mode) o (2) 120V 20 Amp GFCI duplex outlets – (NEMA 5-20R type) o (2) 125 / 250V 50 Amp, 3 pole, 4 wire twistlock (Non-NEMA 6369) Voltage adjustment integrated into Power Zone controller, +/- 10% 720 CCA wet cell battery Battery disconnect Panel lighting for breakers, lugs, and selector switch |
ENCLOSURE | Aluminum, sound attenuated enclosure o UV & fade resistant, high temperature cured, white polyester powder paint o Insulated and baffled o 68 dB(A) @23 ft. (7 m) – prime power Fully lockable enclosure including doors and fuel fill Emergency stop switch located on outside of enclosure Central lifting point Multi-lingual operating/safety decals Document holder with operating manual including AC/DC wiring diagrams Interior Cabinet lighting |
TRAILER | DOT approved tail, side, brake, and directional lights – LED Transportation tie downs Safety chains with spring loaded safety hooks 2 in. (50.8 mm) ball hitch 6000 lb. (2722 kg) axle 2000 lb. (907 kg) tongue jack with footplate P225/75 R15 tubeless tires – 6 ply |
WEIGHT & DIMENSIONS | Skid mounted o Dry weight: 3305 lbs (1499 kg) o Operating weight: 4040 lbs (1833 kg) o 95 x 39 x 65 in (2.41 x 0.99 x 1.65 m) Trailer mounted o Dry weight: 3905 lbs (1771 kg) o Operating weight: 4640 lbs (2105 kg) o 152 x 58 x 83 in (3.81 x 1.45 x 2.11 m) |
WARRANTY | 2 Years / 2000 Hours |
CERTIFICATIONS | CSA Certified |