MTP4SZ 4″ Wet Prime Trash Pump
About the MTP4SZ 4" Wet Prime Trash Pump
Built to handle solids up to 3 in. (76.2 mm) solids, this diesel-powered wet prime trash pump can be used in a variety of environments. The final tier 4 engine meets EPA regulations for reduced emissions.
POWERFUL & DURABLE
- High efficiency pump end with best-in-class, lowest suction/discharge height
- High performance priming system
- Handles solids up to 3 in. (76.2 mm) in diameter
- Durable steel roll cage protects pump radiator and other components from damage
- Run-Dry system for continuous operations without need for external flush water or venting
EASY TO USE
- Designed for easy service and maintenance
- LOFA CP750 digital controller with large, back-lit LCD display
- Automatic start/stop control for use with two-switch inputs
ADDITIONAL FEATURES
- Built-in containment for all engine fluids
- Four-corner leveling for stability and complete fuel usage
- Pad-lockable battery box
- Flip tongue no-weld, removable front plate hitch assembly
Additional information
| ENGINE | • Deutz TD 2.9 L4 – water-cooled, naturally aspirated diesel engine o 49 hp @ 2600 rpm o 4 cylinder o 2.9 Liter displacement o DOC only for exhaust after treatment o EPA Final Tier 4 approved o Steel, single wall fuel tank 113 gal. (428 L) capacity / 100 gal. (379 L) usable • Fuel consumption at prime: 100% – 2.30 gph (8.71 Lph) • Cooling system capable of operating at 120ºF (49ºC) ambient • Disposable air filter – paper element • 950 CCA wet cell battery • 95 Amp alternator • Low coolant warning/shutdown |
|---|---|
| PUMP | • Cornell 4STX Self Prime Centrifugal Pump • 4.00” NPTF – suction & discharge connection • Ductile Iron ASTM A536, 65-45-12 volute casing • Ductile Iron ASTM A536, 100-70-03 impeller • Self-cleaning wear plate – mild steel • Impeller is a 2 vane, semi-open design • Single mechanical seal, John Crane Type 2, with tungsten carbide vs silicon carbide faces • Replaceable wear plate • Pump shaft – 17-4 PH Stainless steel |
| PUMP PERFORMANCE | • Pump maximum output – 900 gpm (3,407 Lpm) • Lift suction – 28 ft. (8.5 m) • Maximum diameter of solids – 3.00” (76.2 mm) • Impeller diameter: 9.75 inches ( cm) • Maximum Efficiency (BEP Percent) – 55% • BEP Flow – 682 gpm (Lpm) @ 107ft. TDH • Total dynamic head – 150 ft (m) • Duty Points: o 500 gpm @ 52-ft TDH @ 1500 RPM, 55% efficiency, NPSHR 9.02 ft o 753 gpm @ 98.6-ft TDH @ 2100 RPM, 55% efficiency, NPSHR 17.2 ft |
| SYSTEM CONTROLS | • White LED lighting control panel lighting • Standard controller – LOFA CP750 o Large, backlit 4.3 in. (109 mm) LCD display Displays engine temp, engine speed, fuel level, engine hrs., coolant temp, and oil pressure o Advanced automatic start/stop control for use with two-switch inputs and 4-20mA transducer o Configurable high and low set points control start/stop operation o Alarm output to signal start warning or shutdown conditions o Heavy-duty IP64 water-resistant key switch with booted key o RS485 serial interface for auxiliary equipment o Electronic e-stop with red LED engagement indicator light |
| TRAILER | • Flip-tongue design • Bolt-on, replaceable front tongue mounting plate • DOT approved LED tail, side, brake, and directional lights • (4) transportation tie downs capable of handling 3 in. (76.2 mm) trailer straps • Safety chains with spring loaded safety hooks • 2 in. (50.8 mm) adjustable ball hitch • 6000 lb. (2722 kg) torsion axle with surge brakes • 2000 lb. (907 kg) tongue jack with footplate • (2) 2000 lb. (907 kg) top wind jacks, with option to add up to (4) • ST225/75R15 tubeless tires – 8 ply • UV & fade resistant, high temperature cured, black polyester power paint • Central lifting point • Document holder with operating manual including the AC/DC wiring diagrams |
| WEIGHT & DIMENSIONS | Trailer Mounted o Dry weight: 3,714 lbs. (1,685 kg) o Operating weight: 4,528 lbs. (2,054 kg) o Dimensions: 150.12 x 75.00 x 73.88 in. (3.81 x 1.91 x 1.88 m) • Skid Mount o Dry weight: 3,094 lbs. (1,403 kg) o Operating weight: 4,528 lbs. (2,054 kg) o Dimensions: 91.16 x 66.60 x 61.50 in. (2.32 x 1.69x 1.56 m) |
| WARRANTY | 1 Year, Unlimited Hours / 2 Years, 2000 Hours; See warranty policy for complete details |
